top of page

MANUFACTURING

Steel Structure Fabrication

All the steel buildings need the steel structure. It forms the framework of the entire building. TABS Construction and Engineering has the in-house capacity to carry out the Design, Detailed Engineering and fabrication of Primary and Secondary steel structures such as Columns, Rafters, Purlins, Girts etc.

steel fabrication.png
Screen Shot 2019-03-06 at 8.07.35 PM.png

Corrugated Roofing Sheets

Essentially this forms the roofs of the steel buildings. The Pre-Painted GI and Aluminium Coils are fed through the roll forming machines and cut to required length. This is then fixed on to the purlins by means of Self Tapping Screws. 

PU Sandwich Panels

These panels are essentially manufactured by injecting Eco friendly Polyurethane, which is a highly insulating material, between two corrugated sheets. TABS Construction and Engineering is equipped with highly sophisticated Sandwich panel press and foaming machines to meet any requirements of the clients. 

Screen Shot 2019-03-06 at 8.07.45 PM.png
Screen Shot 2019-03-06 at 8.07.54 PM.png

Z & C Purlins

Purlins are the secondary structures which form the part of the steel building. Roof sheets are fixed on to the purlins by means of self tapping screws. 

Trimmed Flashings

These are the accessories required for the steel buildings. Trimmed flashings are formed from the color coated coils which are cut to required lengths and formed in various shapes with the help of bending and folding machines.

Screen Shot 2019-03-06 at 8.08.39 PM.png
panels.png

Cold Room Panels

Cold room panels are PU injected panels of higher PU thickness compared to the ordinary sandwich panels. Due to the excellent heat resistance capacity, this is being used in cold room applications.

bottom of page